About Us
      Profile
      Products
      Contact Us


Cangzhou Unipand Fluid Machinery&Equipment Co., Ltd

All Products >> manufacturer

Showing 1 - 10 of 20, total 2 pages        [First] [Previous] [Next] [Last]

1
180°„butt-welded elbow
180°„butt-welded elbow
Specification: Coating Grade Zinc Oxide
Detail: The center to face distance for a "long" radius elbow, abbreviated LR always is "1&©|189; x Nominal Pipe Size (NPS) (1&©|189;D)", while the center to face distance for a "short" radius elbow, abbreviated SR even is to nominal pi...

2
45°„socket elbow
45°„socket elbow
Specification: 45°„Socket Elbow
Detail: The most applied version is the 90°„ long radius and the 45°„ elbow, while the 90°„ short radius elbow is applied if there is too little space. The function of a 180°„ elbow is to change direction of flow through 180°„. E-mai...

3
90°„socket elbow
90°„socket elbow
Specification: 90°„Socket Elbow
Detail: Both, the LR and the SR types have a center to center dimension double the matching 90°„ elbows. These fittings will generally be used in furnesses or other heating or cooling units. E-mail: info(at)hbpipegroup(dot)com Tel:...

4
45°„threaded elbow
45°„threaded elbow
Specification: 45°„Threaded Elbow
Detail: The weakest point on an elbow is the inside radius. ASME B16.9 only standardizes the center to face dimensions and some "squareness" dimensional tolerances. The wall thickness at the weld line location even is standardized, bu...

5
90°„threaded elbow
90°„threaded elbow
Specification: 90°„Threaded Elbow
Detail: In addition to the defined elbows, there is the Reducing Elbow, which is a elbow with various diameters on the ends. Because this elbow, for many suppliers it is not a standard item, and thus probably a high price with a long ...

6
threaded flange
threaded flange
Specification: Threaded Flange
Detail: The threaded flange is similar to the slip-on flange, but the bore is threaded. Its chief merit is that it can be assembled without welding, explaining its use in low pressure services at ordinary atmospheric temperatures and ...

7
weld neck flanges
weld neck flanges
Specification: Weld Neck Flanges
Detail: Weld flange refers to flanges circumferentially butt welded into the system at its neck. The bores of both pipe and flange match,which reduces turbulence and erosion inside the pipeline. In this way, the integrity of the butt ...

8
socket weld flange
socket weld flange
Specification: Socket Weld Flange
Detail: The socket welding flange has a bore and a counter bore dimension. The counter bore is slightly lager than the outer diameter of the matching pipe, allowing the pipe to be inserted into the flange . The diameter of the smaller...

9
integral flange
integral flange
Specification: Integral Flange
Detail: This flange is circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography. E-mail: info(at)hbpipegroup(dot)com Tel: 86-311-85319962 Fax:...

10
spectacle blank
spectacle blank
Specification: Spectacle Blank
Detail: This flange is circumferentially welded into the system at its neck which means that the integrity of the butt welded area can be easily examined by radiography. E-mail: info(at)hbpipegroup(dot)com Tel: 86-311-85319962 Fax:...
Showing 1 - 10 of 20, total 2 pages        [First] [Previous] [Next] [Last]
1 2


Copyright© Cangzhou Unipand Fluid Machinery&Equipment Co., Ltd All Rights Reserved.
Tel : 86-311-85319962 Fax : 86-311-85319962
Powered by Globalimporter